AUTEL ADAS VIDEOS

See how Vann York Collision Center in High Point, North Carolina, is using Autel technology to bring ADAS calibration in-house, streamline collision repair workflows, and reduce reliance on outsourced services. ASE-Certified Master Automobile Technician Eric visits Vann York to talk with the team about their transition to Autel diagnostic, ADAS calibration, and wheel alignment equipment. After working with other scan and calibration tools, the team shares how Autel has helped simplify setup, improve usability, and bring alignment and ADAS calibration together in a more efficient workflow. With guided software, integrated alignment and calibration capabilities, training, and technical support, Vann York is building more control into the repair process—and planning to expand its use of Autel equipment as the business grows. In this video: • Why Vann York brought ADAS calibration in-house • The move from previous equipment to Autel • Combining wheel alignment and ADAS calibration • Improving setup, workflow, and technician usability • Autel training and technical support • How Vann York plans to expand its Autel capabilities Learn more about Autel collision repair solutions at autel.us/collision-repair/ All Autel Collision Repair solutions: https://autel.us/collision-repair/ Don’t forget to like the video and hit the subscribe button to never miss a new video! Visit our website and view our product line at: https://autel.us/ FOLLOW US ON: Facebook: https://www.facebook.com/auteltools Instagram: https://www.instagram.com/auteltools/ X (formally Twitter): https://twitter.com/AutelTools TikTok: https://www.tiktok.com/@auteltools #autel #auteltools #autelnorthamerica

ADAS is no longer optional technology. Lane keep assist, automatic emergency braking, blind spot monitoring, adaptive cruise control, cameras, and radar systems are critical vehicle safety technologies—and repairing them correctly requires complete, accurate, and accessible service information. ▶ Sign the SEMA Right to Modify Petition: https://autel.cc/adas-petition ▶ Share Your Experience: https://autel.us/adas-repair-shouldnt-require-guesswork/ In this video, Autel ADAS expert Stew Peregrine discusses a growing challenge facing collision repairers, glass professionals, mechanical shops, calibration centers, and the entire automotive service industry: **incomplete and inconsistent OEM information for ADAS calibration and repair.** Technicians need clear calibration triggers, wheel alignment requirements, sensor and camera angle specifications, defined tolerances, validated procedures, and the ability to verify that a completed repair has truly restored the vehicle to safe operating condition. Right to Repair must also mean the right to repair safely. It’s time for our industry to come together, share real-world experiences, demand access to the information needed to perform safe and accurate repairs, and establish clear, consistent standards for ADAS calibration. Don’t forget to like the video and hit the subscribe button to never miss a new video! Visit our website and view our product line at: https://autel.us/ FOLLOW US ON: Facebook: https://www.facebook.com/auteltools Instagram: https://www.instagram.com/auteltools/ X (formally Twitter): https://twitter.com/AutelTools TikTok: https://www.tiktok.com/@auteltools #autel #auteltools #autelnorthamerica

What goes into developing better ADAS calibration solutions? It starts with listening to the people using them every day. Go behind the scenes with Autel’s Stew Peregrine for a look at how feedback from technicians, calibration centers, collision repair shops, dealerships, and glass companies helps shape Autel ADAS products, software, training, and support. From reviewing customer experiences and identifying recurring challenges to working with product and engineering teams and observing real-world calibrations in the field, the goal is simple: make ADAS calibration easier to understand, more efficient to perform, and above all, safer. Because ADAS calibration isn’t just about equipment or technology. It’s about ensuring that safety systems perform as intended when drivers and their families depend on them. Schedule an ADAS business consult today: https://autel.us/contact-our-adas-experts/ Learn more about Autel ADAS solutions at: https://autel.us/autel-adas-systems/ Don’t forget to like the video and hit the subscribe button to never miss a new video! Visit our website and view our product line at: https://autel.us/ FOLLOW US ON: Facebook: https://www.facebook.com/auteltools Instagram: https://www.instagram.com/auteltools/ X (formally Twitter): https://twitter.com/AutelTools TikTok: https://www.tiktok.com/@auteltools #autel #auteltools #autelnorthamerica #AutelADAS #ADAS #ADASCalibration #AutomotiveTechnology #CollisionRepair #AutoGlass

In this ADAS Calibration Lab video, we walk through a complete dynamic front camera calibration on a 2023 Buick Envision after a windshield replacement and camera reinstallation using an Autel diagnostic tablet. Unlike a static calibration performed with targets and a calibration frame, this procedure requires driving the vehicle under specific conditions while the system recalibrates using real-world inputs. Follow along as we demonstrate the complete workflow, from pre-scan and vehicle preparation through dynamic calibration, post-scan, and final verification. 🔧 What You’ll Learn in This Video - How to perform a pre-scan before ADAS calibration - How to identify the correct GM radio/build code - Vehicle preparation for dynamic camera calibration - How to initiate the Buick Envision calibration procedure - How to select the right driving route and conditions - How to monitor calibration progress while driving - Post-scan and test-drive verification - How to document the completed calibration ⚠️ Pro Tips for Dynamic Calibration Choose a route that allows you to maintain the required vehicle speed with minimal stops and clearly visible lane markings and roadside features. Make sure the windshield is clean, tire pressures are set to specification, and follow all vehicle- and procedure-specific prompts before beginning the calibration drive. 🚗 Why ADAS Calibration Matters Windshield replacement can affect the position and operation of the forward-facing camera used by critical ADAS functions. Performing the required calibration helps ensure these systems are operating as intended before the vehicle is returned to the customer. 📈 Who This Video Is For ADAS Calibration Technicians Auto Glass Installers Collision Repair Shops Automotive Diagnostic Professionals 🔔 More ADAS Calibration Lab Explore real-world ADAS calibration procedures, diagnostics, and step-by-step workflows across a growing range of vehicle makes and models: https://autel.us/adas-calibration-lab/ Don't forget to like the video and hit the subscribe button to never miss a new video! Visit our website and view our product line at: https://autel.us/ FOLLOW US ON: Facebook: https://www.facebook.com/auteltools Instagram: https://www.instagram.com/auteltools/ X (formally Twitter): https://twitter.com/AutelTools TikTok: https://www.tiktok.com/@auteltools #autel #auteltools #autelnorthamerica #Autel #ADAS #ADASCalibration #BuickEnvision #DynamicCalibrationDon’t

Meet Chris Haskins, Senior Account Executive at MMP Capital. Apply today and Chris will get the ball rolling on your ADAS equipment purchase: https://mmpcapital.com/autel/ Expand your ADAS calibration capabilities with Autel’s industry-leading solutions. From the IA1000 to the MA600, Autel delivers fast, accurate calibrations for today’s advanced vehicles. Qualifying customers can now take advantage of 4.9% financing for 36 months*. Hurry, this offer ends September 30, 2026. Full details: https://autel.us/adas-special-financing/ Don’t forget to like the video and hit the subscribe button to never miss a new video! Visit our website and view our product line at: https://autel.us/ FOLLOW US ON: Facebook: https://www.facebook.com/auteltools Instagram: https://www.instagram.com/auteltools/ X (formally Twitter): https://twitter.com/AutelTools TikTok: https://www.tiktok.com/@auteltools #autel #auteltools #autelnorthamerica

Replacing a windshield on a modern vehicle often means recalibrating critical ADAS safety systems. In this video, we walk through the complete ADAS calibration process on a 2024 Nissan Pathfinder after a windshield replacement. Using the Autel IA1000 ADAS Calibration System, we demonstrate both front camera and radar calibration procedures while highlighting the setup requirements, positioning techniques, and verification steps necessary for a successful OEM-compliant repair. You'll see how Autel's automated target recognition, monitor-based calibration targets, and real-time alignment guidance simplify complex calibration procedures while improving accuracy and efficiency. In this video: - 2024 Nissan Pathfinder windshield camera calibration - Front radar calibration procedure - Vehicle preparation requirements - Wheel clamp installation and alignment setup - Automatic target detection and positioning - Calibration frame adjustments - Radar plate leveling and alignment - Pre-scan and post-scan diagnostics - Calibration reporting and documentation - OEM-aware Nissan ADAS workflows Whether you're a collision repair technician, glass installer, calibration specialist, or diagnostic professional, this video provides a real-world look at proper ADAS calibration procedures following windshield replacement. Learn more about Autel ADAS solutions: 👉 https://autel.us/adas-calibration-systems/ Don't forget to like the video and hit the subscribe button to never miss a new video! Visit our website and view our product line at: https://autel.us/ FOLLOW US ON: Facebook: https://www.facebook.com/auteltools Instagram: https://www.instagram.com/auteltools/ X (formally Twitter): https://twitter.com/AutelTools TikTok: https://www.tiktok.com/@auteltools #autel #auteltools #autelnorthamerica #NissanPathfinder #ADASCalibration #Autel #IA1000 #WindshieldReplacement #RadarCalibration #CameraCalibration #CollisionRepair #AutomotiveDiagnostics #Nissan

When a windshield or bumper is replaced, proper ADAS calibration is essential to ensure vehicle safety systems perform as designed. In this video, we walk through the complete calibration process on a 2021 Audi Q7 following a windshield and rear bumper replacement. Using the Autel IA1000 ADAS Calibration System, we demonstrate the critical preparation steps, target placement procedures, front camera calibration, rear sensor calibration, and post-calibration verification required to restore OEM-intended functionality. You'll see how Audi's unique calibration requirements demand precise setup, accurate target positioning, and strict adherence to manufacturer procedures. In this video: - 2021 Audi Q7 front camera calibration - Rear sensor and blind spot calibration - Proper ADAS setup procedures - Wheel clamp and target positioning - Level floor verification - Pre-scan and post-scan workflows - Calibration reporting and documentation - OEM-compliant Audi calibration practices - Autel IA1000 ADAS system workflow Whether you're a collision repair technician, glass installer, calibration specialist, or diagnostic professional, this video provides valuable insight into a real-world Audi ADAS calibration procedure. Learn more about Autel ADAS solutions: 👉 https://autel.us/adas-calibration-systems/ Don't forget to like the video and hit the subscribe button to never miss a new video! Visit our website and view our product line at: https://autel.us/ FOLLOW US ON: Facebook: https://www.facebook.com/auteltools Instagram: https://www.instagram.com/auteltools/ X (formally Twitter): https://twitter.com/AutelTools TikTok: https://www.tiktok.com/@auteltools #autel #auteltools #autelnorthamerica #AudiQ7 #ADASCalibration #Autel #IA1000 #WindshieldReplacement #BlindSpotCalibration #CameraCalibration #CollisionRepair #AutomotiveDiagnostics #Audi

In this video, ASE Certified Master Technician Eric visits Zimbrick of Madison, Wisconsin to explore how one of the region’s largest dealership groups transformed its ADAS calibration workflow by bringing calibrations in-house. With 16 automotive brands, multiple body shops, and a centralized calibration center, Zimbrick faced growing challenges around outsourcing, repair consistency, liability, and customer communication. Partnering with National Calibration and Diagnostic Solutions (NCDS) and leveraging advanced tooling helped them build a streamlined, scalable operation designed for the future of collision repair. In this video: - Why Zimbrick stopped outsourcing ADAS calibrations - The benefits of a centralized calibration center - How in-house calibration improves repair quality and accountability - Increasing same-day service through glass + calibration integration - Training estimators and technicians for modern ADAS repairs - The importance of documentation and OEM compliance - How partnerships and support accelerate shop growth This is a real-world look at how modern collision centers are adapting to increasingly complex vehicle technology while improving efficiency, profitability, and customer trust. Don’t forget to like the video and hit the subscribe button to never miss a new video! Full IA9000 details: https://autel.us/product/maxisys-ia900wa/ Contact an ADAS expert: https://autel.us/contact-our-adas-experts/ Visit our website and view our product line at: https://autel.us/ FOLLOW US ON: Facebook: https://www.facebook.com/auteltools Instagram: https://www.instagram.com/auteltools/ X (formally Twitter): https://twitter.com/AutelTools TikTok: https://www.tiktok.com/@auteltools #ADAS #CollisionRepair #Autel #ADASCalibration #BodyShop #AutomotiveDiagnostics #WindshieldCalibration #RepairIndustry #NCDS #CollisionCenter

In this video, we visit Zimbrick Group’s centralized calibration facility to see how technicians are using the Autel IA900 and Maxis Ultra to complete faster, more accurate calibrations across a wide range of vehicles. From Guided Calibration workflows to advanced diagnostics and live bidirectional data, this video shows how Autel helps shops reduce dealership dependency, improve repair quality, and keep vehicles safe and factory compliant. We also break down a real-world 2024 Mazda CX-5 calibration case where Autel’s diagnostic capabilities and National Calibration’s remote support helped identify an internally damaged radar sensor that would have otherwise been missed. In this video: - How Zimbrick performs 95% of calibrations without OE tools - Guided Calibration and camera-based target setup - Faster ADAS workflows and in-process scanning - Diagnosing difficult radar calibration failures - Why Autel excels on older Mercedes and Porsche vehicles - The value of remote support and continuous software updates - How shops improve efficiency, documentation, and profitability Whether you’re running a collision center, calibration shop, or diagnostic team, this is a real-world look at how advanced aftermarket tools are changing the industry. Don't forget to like the video and hit the subscribe button to never miss a new video! Full IA9000 details: https://autel.us/product/maxisys-ia900wa/ Contact an ADAS expert: https://autel.us/contact-our-adas-experts/ Visit our website and view our product line at: https://autel.us/ FOLLOW US ON: Facebook: https://www.facebook.com/auteltools Instagram: https://www.instagram.com/auteltools/ X (formally Twitter): https://twitter.com/AutelTools TikTok: https://www.tiktok.com/@auteltools #Autel #ADASCalibration #IIA900 #MaxisUltra #CollisionRepair #AutomotiveDiagnostics #NationalCalibration #ADAS #RadarCalibration #BodyShopDon’t

In this video, we demonstrate the complete night vision camera ADAS calibration procedure on a 2024 Jeep Grand Cherokee 4XE Summit following front-end collision repair and camera replacement. Using the Autel IA1000 calibration system, we walk through the full setup and calibration process required to restore proper night vision system functionality and ensure accurate thermal imaging performance. This step-by-step tutorial covers: • Night Vision Camera Calibration • Thermal Imaging System Setup • NV Calibrator Alignment • Laser Positioning Procedures • Pre- and Post-Scan Verification You’ll learn how to: ✔ Perform a proper pre-scan and verify system status ✔ Prepare the vehicle for accurate night vision calibration ✔ Install and align the NV calibrator using laser guidance ✔ Maintain proper vehicle conditions and battery voltage ✔ Complete pitch, roll, and yaw compensation setup ✔ Verify successful calibration through the instrument cluster and diagnostic system This video also highlights important best practices including maintaining a cold vehicle condition, stabilizing voltage with a battery maintainer, cleaning the camera lens, and performing post-calibration road testing. Whether you're performing collision repair calibrations or expanding your ADAS service capabilities, this guide provides a practical overview of night vision calibration procedures on modern Jeep platforms. For more ADAS training and calibration tutorials, visit Autel Academy. Don’t forget to like the video and hit the subscribe button to never miss a new video! Full IA1000 details here: https://autel.us/product/maxisys-ia1000/ Visit our website and view our product line at: https://autel.us/ FOLLOW US ON: Facebook: https://www.facebook.com/auteltools Instagram: https://www.instagram.com/auteltools/ X (formally Twitter): https://twitter.com/AutelTools TikTok: https://www.tiktok.com/@auteltools #autel #auteltools #autelnorthamerica

In this video, we demonstrate the complete front radar calibration procedure on a 2018 Lexus IS300 following front bumper removal and collision repair. Using the Autel MaxiSys Ultra S2 and IA1000 calibration system, we walk through the full ADAS calibration workflow, including pre-scan procedures, laser alignment setup, reflector positioning, and final system verification to ensure proper adaptive cruise control operation. This step-by-step tutorial covers: • Front Radar Calibration • Adaptive Cruise Control (ACC) Setup • Reflector 80201 Positioning • Laser Alignment Procedures • Pre- and Post-Scan Verification You’ll learn how to: ✔ Perform a proper pre-scan and check for DTCs ✔ Prepare the vehicle and calibration environment correctly ✔ Clean and inspect the radar sensor surface before calibration ✔ Set up wheel clamps, lasers, and reflector positioning accurately ✔ Use pitch, roll, and yaw compensation features within the Ultra 1000 ✔ Complete radar calibration and confirm zero misalignment readings This video also highlights important best practices including maintaining stable battery voltage, removing reflective objects from the calibration area, verifying proper tire pressure, and performing post-calibration road testing. Whether you're performing collision repair calibrations or expanding your ADAS service capabilities, this guide provides a practical overview of front radar calibration procedures on the Lexus IS300. For more ADAS training and calibration tutorials, visit Autel Academy. Don’t forget to like the video and hit the subscribe button to never miss a new video! Full IA1000 details here: https://autel.us/product/maxisys-ia1000/ Visit our website and view our product line at: https://autel.us/ FOLLOW US ON: Facebook: https://www.facebook.com/auteltools Instagram: https://www.instagram.com/auteltools/ X (formally Twitter): https://twitter.com/AutelTools TikTok: https://www.tiktok.com/@auteltools #autel #auteltools #autelnorthamerica

In this video, we demonstrate the complete front camera calibration procedure on a 2018 Lexus IS300 following a windshield replacement. Using the Autel 1000 calibration system, we walk through the full ADAS calibration workflow, including vehicle preparation, target positioning, alignment setup, and post-calibration verification to ensure proper camera functionality and vehicle safety. This step-by-step tutorial covers: • Front Camera Calibration • Windshield Replacement ADAS Procedures • Digital Target & Alignment Setup • Pre- and Post-Scan Verification • Vehicle Preparation Requirements You’ll learn how to: ✔ Perform a proper pre-scan and check for DTCs ✔ Prepare the vehicle for accurate calibration ✔ Set up digital calibration panels and alignment aids ✔ Position the vehicle with correct pitch, roll, and yaw compensation ✔ Adjust target brightness for improved camera recognition ✔ Complete the calibration process and verify successful operation This video also highlights important best practices including maintaining proper tire pressure, stable battery voltage, correct ambient lighting, and post-calibration road testing. Whether you're performing windshield replacement calibrations or expanding your ADAS service capabilities, this guide provides a practical overview of front camera calibration procedures on the Lexus IS300. For more ADAS training and calibration tutorials, visit Autel Academy. Don’t forget to like the video and hit the subscribe button to never miss a new video! Full IA1000 details here: https://autel.us/product/maxisys-ia1000/ Visit our website and view our product line at: https://autel.us/ FOLLOW US ON: Facebook: https://www.facebook.com/auteltools Instagram: https://www.instagram.com/auteltools/ X (formally Twitter): https://twitter.com/AutelTools TikTok: https://www.tiktok.com/@auteltools #autel #auteltools #autelnorthamerica

In this video, we demonstrate the complete static front radar calibration procedure on a 2024 Jeep Grand Cherokee 4XE Hybrid Summit Edition following a front radar replacement after collision repair. Using the Autel IA1000 calibration system, we walk through the full ADAS setup process required for Chrysler/Stellantis vehicles, including secure gateway access, radar target positioning, laser alignment, and calibration verification. This step-by-step tutorial covers: • Front Radar Static Calibration • Secure Gateway Access with Auto Auth • Calibration Plate 602-09 Setup • Laser & Level Alignment Procedures • Pre- and Post-Scan Verification You’ll learn how to: ✔ Perform a proper pre-scan and save calibration reports ✔ Unlock Stellantis secure gateway modules using Auto Auth ✔ Set up the vehicle with correct suspension and tire conditions ✔ Position and level the radar calibration target accurately ✔ Use laser alignment and pitch, roll, yaw compensation features ✔ Complete radar calibration and verify successful ADAS operation This video also highlights important best practices including stable battery voltage maintenance, Wi-Fi connectivity requirements, and post-calibration road testing. Whether you're performing collision repair calibrations or learning advanced ADAS workflows, this guide provides a practical overview of radar calibration procedures on modern Jeep platforms. For more ADAS training and calibration tutorials, visit Autel Academy. Don’t forget to like the video and hit the subscribe button to never miss a new video! Full IA1000 details here: https://autel.us/product/maxisys-ia1000/ Visit our website and view our product line at: https://autel.us/ FOLLOW US ON: Facebook: https://www.facebook.com/auteltools Instagram: https://www.instagram.com/auteltools/ X (formally Twitter): https://twitter.com/AutelTools TikTok: https://www.tiktok.com/@auteltools #autel #auteltools #autelnorthamerica

In this video, we perform a complete ADAS calibration on a 2024 Jeep Grand Cherokee 4XE Hybrid Summit Edition following a major front-end collision. We’ll walk through two critical calibration procedures: • Front Radar Calibration • Night Vision Camera Calibration Using the Autel IA1000 system, this step-by-step guide demonstrates how to properly calibrate advanced safety systems after component replacement. From unlocking the secure gateway to final validation, we cover the full workflow required for Chrysler/Stellantis vehicles. You’ll learn how to: ✔ Perform pre- and post-scans to verify system integrity ✔ Unlock the secure gateway and maintain module communication ✔ Properly set up calibration plates, lasers, and alignment tools ✔ Execute static radar calibration with precise positioning ✔ Calibrate the night vision system using an NV calibrator device ✔ Ensure accurate results with proper vehicle setup and conditions This video also highlights key requirements such as battery voltage maintenance, suspension settings, and Wi-Fi connectivity to ensure a smooth calibration process. Whether you're working on collision repair or advanced diagnostics, this guide provides a clear and efficient approach to ADAS calibration on modern Jeep platforms. For more training and in-depth calibration procedures, visit Autel Academy. Don’t forget to like the video and hit the subscribe button to never miss a new video! IA100 info here: https://autel.us/product/maxisys-ia1000/ Visit our website and view our product line at: https://autel.us/ FOLLOW US ON: Facebook: https://www.facebook.com/auteltools Instagram: https://www.instagram.com/auteltools/ X (formally Twitter): https://twitter.com/AutelTools TikTok: https://www.tiktok.com/@auteltools #autel #auteltools #autelnorthamerica

In this video, we walk through a complete ADAS calibration on a 2018 Lexus IS300 following common repairs like windshield replacement, front bumper removal, and rear bumper work. We’ll cover three essential calibration procedures: • Front Camera Calibration • Front Radar Calibration • Blind Spot Monitoring (BSM) Calibration Using the Autel IA1000 calibration system, we demonstrate how these procedures can be completed efficiently in a typical shop environment with minimal space requirements. From setup to execution, this step-by-step guide highlights best practices, proper equipment positioning, and key tips to ensure accurate results. You’ll learn how to: ✔ Perform pre- and post-scans to verify system health ✔ Properly set up the vehicle and calibration equipment ✔ Use digital targets, lasers, and reflectors for precise alignment ✔ Complete calibrations with automated pitch, roll, and yaw adjustments ✔ Validate repairs with final system checks and test drives Whether you're dealing with ADAS recalibration after collision repair or routine service, this video provides a clear and practical workflow to get the job done right. For more training and advanced calibration tutorials, be sure to check out Autel Academy. Don’t forget to like the video and hit the subscribe button to never miss a new video! IA100 info here: https://autel.us/product/maxisys-ia1000/ Visit our website and view our product line at: https://autel.us/ FOLLOW US ON: Facebook: https://www.facebook.com/auteltools Instagram: https://www.instagram.com/auteltools/ X (formally Twitter): https://twitter.com/AutelTools TikTok: https://www.tiktok.com/@auteltools #autel #auteltools #autelnorthamerica

In this episode of utel In-shop, we visit Automotive Calibration Centers in Port St. Lucie, Florida to uncover how one shop turned ADAS calibration into a highly profitable business. We met with owner Al Urban to break down the real-world workflow behind modern vehicle calibration—and why it’s becoming essential for every collision and repair shop today. From diagnostics to final calibration, you’ll see how Autel tools like the IA900 calibration system and MaxiSYS Ultra tablet are helping shops move faster, document everything, and scale their operations efficiently. 🔧 What you’ll learn in this video: • Why ADAS calibration is critical after repairs • How this shop built a business serving body shops (not retail customers) • The step-by-step calibration workflow using Autel tools • Why diagnostics ALWAYS come first • How static calibrations can be done in ~10 minutes • The importance of pre-scan & post-scan reports for insurance and liability • Additional revenue streams like TPMS and key programming 💡 Key takeaway: Speed + accuracy + documentation = profitability. If you're in collision repair, diagnostics, or thinking about getting into ADAS calibration, this is a must-watch. 👉 Featured tools: • Autel IA900 Calibration Frame • MaxiSYS Ultra Diagnostic Scanner • Autel TPMS & Key Programming Solutions 📍 Filmed at Automotive Calibration Centers Don’t forget to like the video and hit the subscribe button to never miss a new video! More Autle ADAS here: https://autel.us/autel-adas-systems/ Visit our website and view our product line at: https://autel.us/ FOLLOW US ON: Facebook: https://www.facebook.com/auteltools Instagram: https://www.instagram.com/auteltools/ X (formally Twitter): https://twitter.com/AutelTools TikTok: https://www.tiktok.com/@auteltools #autel #auteltools #autelnorthamerica

In this ADAS Calibration Lab video, we show you how to calibrate the windshield camera on a 2019 Toyota RAV4 after a windshield replacement using the Autel IA1000 ADAS calibration system and Ultra S2 tablet. Windshield camera calibration is essential to ensure advanced driver assistance systems (ADAS) like lane departure warning and forward collision systems are functioning accurately. In this step-by-step guide, we walk through the complete calibration process while highlighting best practices and key setup requirements. We begin with proper vehicle preparation including checking tire pressure, verifying fuel level, ensuring proper lighting conditions, and positioning the vehicle on a level surface. We also perform a pre-scan to identify any diagnostic trouble codes and confirm the system is ready for calibration. Follow along as we demonstrate how to select the correct calibration procedure, set up the target board, and use alignment aids to properly position the calibration system. The Autel MaxiSys 1000 simplifies the process by automatically adjusting for pitch and roll and guiding the technician through precise target alignment. We also walk through the one-time calibration method, which allows for a faster and more efficient setup using a single target. The system automatically moves and fine-tunes positioning once alignment indicators are confirmed, reducing the need for manual adjustments. To finish, we perform a post-calibration scan to verify no new diagnostic trouble codes are present and explain the importance of completing a test drive to confirm proper ADAS functionality before returning the vehicle to the customer. We also highlight how to generate detailed calibration reports with images for documentation and customer records. This video is a complete guide for technicians looking to improve efficiency and accuracy when performing windshield camera calibrations. Don’t forget to like the video and hit the subscribe button to never miss a new video! Visit our website and view our product line at: https://autel.us/ FOLLOW US ON: Facebook: https://www.facebook.com/auteltools Instagram: https://www.instagram.com/auteltools/ X (formally Twitter): https://twitter.com/AutelTools TikTok: https://www.tiktok.com/@auteltools #autel #auteltools #autelnorthamerica

In this ADAS Calibration Lab video, we show you how to calibrate the front radar sensor on a 2019 Toyota RAV4 using the Autel IA1000 ADAS calibration system and Autel S2 tablet. Radar calibration is essential to ensure advanced driver assistance systems (ADAS) like adaptive cruise control and collision avoidance are functioning accurately. In this step-by-step guide, we walk through the full calibration process while highlighting how modern tools have simplified what was once a complex procedure. We begin with a pre-scan to identify any diagnostic trouble codes and verify system readiness. We also cover proper vehicle preparation including tire pressure checks and the use of a battery maintainer to maintain consistent voltage throughout the calibration process. Follow along as we demonstrate how to set up the calibration frame, attach magnetic lasers, and use alignment aids to precisely position the vehicle and calibration equipment. The Autel IA1000 simplifies the process by automatically adjusting roll and pitch once alignment is confirmed, reducing the need for manual measurements. We also walk through how to mark the laser reference point, position the reflector stand at the correct height, and complete the calibration process. The system verifies successful calibration through the software interface, ensuring accuracy and consistency. To finish, we perform a post-calibration scan to confirm no diagnostic trouble codes are present and explain why a test drive is critical to verify proper radar and ADAS functionality before returning the vehicle to the customer. This video is a complete guide for technicians looking to improve efficiency and accuracy when performing radar sensor calibrations. For more training and advanced calibration procedures, visit Autel Academy. Don’t forget to like the video and hit the subscribe button to never miss a new video! Visit our website and view our product line at: https://autel.us/ FOLLOW US ON: Facebook: https://www.facebook.com/auteltools Instagram: https://www.instagram.com/auteltools/ X (formally Twitter): https://twitter.com/AutelTools TikTok: https://www.tiktok.com/@auteltools #autel #auteltools #autelnorthamerica

In this ADAS Calibration Lab video, we show you how to calibrate the blind spot monitoring system on a 2021 Audi Q7 after a rear-end collision and rear fascia replacement using the Autel IA1000 ADAS calibration system. Blind spot calibration is essential to ensure proper detection of vehicles in adjacent lanes and maintain the safety and accuracy of ADAS features. Audi uses a unique calibration process, and in this video, we walk through the complete step-by-step procedure. We begin with proper vehicle preparation including centering the steering wheel, verifying tire pressure, filling the fuel tank, and performing a pre-scan to check for any diagnostic trouble codes. The vehicle is positioned on a level floor with sufficient space to set up the calibration equipment. Follow along as we demonstrate how to set up the Autel calibration frame, install wheel targets in the Audi-specific configuration, and align the system so the cameras can properly read the targets. Once aligned, the frame locks into position and we move into the calibration box setup. We also show how to install and level the calibration box using the tablet interface, connect power through the frame, and begin the calibration process. The system verifies alignment and completes the calibration automatically once all conditions are met. To finish, we perform a post-calibration scan to check for diagnostic trouble codes and explain the importance of completing a test drive to confirm full system functionality. We also highlight how to generate and save calibration reports for documentation and customer records. This video is a complete guide for technicians working on Audi blind spot systems and looking to improve accuracy and efficiency in their calibration workflow. For more training and advanced calibration procedures, visit Autel Academy. Don’t forget to like the video and hit the subscribe button to never miss a new video! Visit our website and view our product line at: https://autel.us/ FOLLOW US ON: Facebook: https://www.facebook.com/auteltools Instagram: https://www.instagram.com/auteltools/ X (formally Twitter): https://twitter.com/AutelTools TikTok: https://www.tiktok.com/@auteltools #autel #auteltools #autelnorthamerica

In this ADAS Calibration Lab video, we show you how to calibrate the front camera on a 2021 Audi Q7 after a windshield replacement using the Autel IA1000 ADAS calibration system. Front camera calibration is critical to ensure advanced driver assistance systems (ADAS) like lane departure warning, adaptive cruise control, and collision avoidance are functioning properly. Using the Autel IA1000, we walk through a complete step-by-step process for accurate and efficient calibration. We begin with proper vehicle preparation including performing a pre-scan, verifying tire pressure, checking fluid levels, and ensuring the vehicle is positioned on level ground with proper lighting conditions. These steps are essential to ensure calibration accuracy. Follow along as we set up the calibration frame, install the target board, and use alignment aids and wheel clamps to stabilize the vehicle. The Autel system simplifies the process by automatically adjusting the calibration frame to the correct height and position once alignment indicators are confirmed. We also demonstrate how to verify proper setup using system indicators, input required measurements, and complete the automatic calibration process. The IA1000 eliminates much of the manual measurement, helping improve efficiency and reduce setup time. To finish, we perform a post-calibration scan to check for diagnostic trouble codes and explain why a test drive is critical to confirm full ADAS functionality before returning the vehicle to the customer. This video is a complete guide for technicians looking to improve accuracy and efficiency when performing windshield camera calibrations. For more training and advanced calibration procedures, visit Autel Academy. Don’t forget to like the video and hit the subscribe button to never miss a new video! Visit our website and view our product line at: https://autel.us/ FOLLOW US ON: Facebook: https://www.facebook.com/auteltools Instagram: https://www.instagram.com/auteltools/ X (formally Twitter): https://twitter.com/AutelTools TikTok: https://www.tiktok.com/@auteltools #autel #auteltools #autelnorthamerica

In this ADAS Calibration Lab video, we show you how to calibrate the radar and blind spot sensors on a 2023 Mazda CX-50 after bumper damage and replacement using dynamic ADAS calibration with the Autel Ultra S2 tablet. Unlike traditional static calibrations, Mazda now utilizes dynamic calibration methods for radar and blind spot sensors. This means the calibration is completed by driving the vehicle under specific real-world conditions rather than using targets or calibration frames. We walk through the full process starting with proper vehicle preparation, including checking tire pressure and ensuring the vehicle is free of excessive weight. We also cover the ideal environmental conditions needed for successful calibration, such as avoiding rain, snow, tunnels, and bridges while selecting a two-lane road with clear lane markings and roadside features. Follow along as we demonstrate how to enter dynamic learning mode using the diagnostic tablet and monitor calibration progress through both the vehicle dashboard and the tool interface. We explain how maintaining steady driving conditions, speeds above 3 mph, and occasional deceleration helps the system complete calibration efficiently. We also cover blind spot sensor calibration after rear bumper replacement, which follows a similar dynamic process and typically completes within minutes when proper conditions are met. To finish, we perform a post-calibration scan to check for diagnostic trouble codes and explain the importance of completing a test drive to verify full ADAS functionality before returning the vehicle to the customer. This video is a must-watch for technicians adapting to newer dynamic calibration procedures and looking to improve efficiency without traditional calibration setups. For more training and advanced calibration procedures, visit Autel Academy. Don’t forget to like the video and hit the subscribe button to never miss a new video! Visit our website and view our product line at: https://autel.us/ FOLLOW US ON: Facebook: https://www.facebook.com/auteltools Instagram: https://www.instagram.com/auteltools/ X (formally Twitter): https://twitter.com/AutelTools TikTok: https://www.tiktok.com/@auteltools #autel #auteltools #autelnorthamerica

In this ADAS Calibration Lab video, we show you how to calibrate the front camera on a 2023 Mazda CX-50 after a windshield replacement using the Autel IW1000 ADAS calibration system. Front camera calibration is critical to ensure advanced driver assistance systems (ADAS) like lane departure warning, forward collision warning, and adaptive cruise control are functioning properly. Using the Autel IW1000, we walk through a complete step-by-step process for accurate and efficient calibration. We begin with a pre-scan to check for any existing diagnostic trouble codes and confirm the vehicle is ready for calibration. From there, we cover proper vehicle setup including positioning the vehicle on a level surface, ensuring the windshield is clean, setting the tires straight, and installing rear wheel clamps. Follow along as we demonstrate how to use the IW1000’s digital calibration targets, which eliminate the need for manual target placement and simplify alignment. The system provides guided positioning and automatically compensates for minor roll, pitch, and yaw to ensure precise calibration. We also walk through selecting the correct calibration procedure, confirming target alignment with system indicators, and executing the static calibration process. The IW1000 handles brightness adjustments and camera height automatically, making the process faster and more accurate. To finish, we perform a post-calibration scan to verify no new diagnostic trouble codes are present and explain the importance of completing a test drive to confirm full ADAS functionality. This video is a complete guide for technicians looking to improve efficiency and accuracy when performing front camera calibrations. For more training and advanced calibration procedures, visit Autel Academy. Don’t forget to like the video and hit the subscribe button to never miss a new video! Visit our website and view our product line at: https://autel.us/ FOLLOW US ON: Facebook: https://www.facebook.com/auteltools Instagram: https://www.instagram.com/auteltools/ X (formally Twitter): https://twitter.com/AutelTools TikTok: https://www.tiktok.com/@auteltools #autel #auteltools #autelnorthamerica

In this ADAS Calibration Lab video, we show you how to calibrate the front radar sensor on a 2024 Nissan Pathfinder after a front bumper removal and reinstallation using the Autel ADAS calibration system. Radar calibration is essential to ensure advanced driver assistance systems (ADAS) like adaptive cruise control and collision avoidance are operating accurately and safely. Using the Autel device, we walk through the full step-by-step process to complete this calibration correctly. We begin with proper vehicle setup including tire pressure checks, pre-scan diagnostics, and ensuring the vehicle is positioned on a level surface with the steering wheel centered. From there, we demonstrate how to set up the calibration frame, install the radar calibration plate, and use alignment aids, lasers, and bubble levels to achieve precise positioning. Follow along as we guide you through using the Autel software, including logging into the Nissan Gateway with an Auto Off account to access advanced calibration functions. We also show how to align the calibration plate with the radar sensor, verify positioning using the system indicators, and complete the automatic calibration process. To finish, we perform a post-calibration scan to check for any diagnostic trouble codes and explain why a test drive is critical to confirm proper system performance. This step-by-step guide is ideal for technicians looking to improve accuracy and efficiency when performing radar calibrations on modern vehicles. For more training and advanced calibration procedures, visit Autel Academy. Don’t forget to like the video and hit the subscribe button to never miss a new video! Visit our website and view our product line at: https://autel.us/ FOLLOW US ON: Facebook: https://www.facebook.com/auteltools Instagram: https://www.instagram.com/auteltools/ X (formally Twitter): https://twitter.com/AutelTools TikTok: https://www.tiktok.com/@auteltools #autel #auteltools #autelnorthamerica

In this ADAS Calibration Lab video, we show you how to calibrate the windshield camera on a 2024 Nissan Pathfinder after a windshield replacement using the Autel IA1000 ADAS calibration system and Ultra S2 tablet. Proper calibration is essential to ensure advanced driver assistance systems (ADAS) like lane keep assist, adaptive cruise control, and collision avoidance are working accurately and safely. Using the Autel device, we walk through a complete, step-by-step calibration process from setup to completion. We cover everything you need to know including vehicle preparation, selecting the correct calibration environment, and positioning the vehicle on level ground with the required space. The Autel system streamlines the process with digital target displays, guided alignment, and automatic verification of distance, angle, and offset. Follow along as we install the calibration frame, position alignment aids, input vehicle measurements, and run the automatic calibration procedure. We also demonstrate how to generate pre- and post-calibration scans and produce a detailed calibration report for documentation and customer records. To finish, we perform a post-calibration diagnostic scan and explain why a test drive is critical to confirm proper ADAS functionality. This video is a complete guide for technicians looking to improve accuracy, efficiency, and confidence when performing windshield camera calibrations. For more training and calibration resources, visit Autel Academy. Don’t forget to like the video and hit the subscribe button to never miss a new video! Visit our website and view our product line at: https://autel.us/ FOLLOW US ON: Facebook: https://www.facebook.com/auteltools Instagram: https://www.instagram.com/auteltools/ X (formally Twitter): https://twitter.com/AutelTools TikTok: https://www.tiktok.com/@auteltools #autel #auteltools #autelnorthamerica

What does it really take to run a professional ADAS training academy? Go behind the scenes of Autel Academy for a full day in the life of our ADAS trainers, Chris Gutierrez and Frank Coronado, from early morning travel to hands-on training sessions. This is a look at the preparation, problem-solving, and dedication that goes into delivering real-world automotive education. Register for Your ADAS Training Now: https://autel.us/autel-academy/ From 2:30 AM wake-ups to coordinating vehicles, tools, and training environments, every detail matters. Whether it’s dealing with weather, setting up the shop, or making sure every student gets hands-on experience, this is the side of training most people never see. This isn’t just about calibrations—it’s about building a mindset. Autel Academy is focused on developing technicians who understand the fundamentals, think critically, and continue learning long after the class ends. What goes into a typical training day: - Early travel, planning, and coordination - Vehicle sourcing and prep for hands-on learning - Shop setup and equipment organization - Managing real-world challenges like weather and logistics - Delivering high-level training backed by real industry experience At the core of it all is a simple goal: create technicians who don’t just follow procedures—but understand them, teach them, and push the industry forward. If you're in the automotive industry—or looking to get into ADAS—this is what the work really looks like behind the scenes. 🔔 Subscribe for more ADAS training, behind-the-scenes content, and real-world calibration insights. 👉 Learn more about Autel Academy training and tools. #ADAS #AutelAcademy #DayInTheLife #AutomotiveTraining #BehindTheScenesDon’t forget to like the video and hit the subscribe button to never miss a new video! Visit our website and view our product line at: https://autel.us/ FOLLOW US ON: Facebook: https://www.facebook.com/auteltools Instagram: https://www.instagram.com/auteltools/ X (formally Twitter): https://twitter.com/AutelTools TikTok: https://www.tiktok.com/@auteltools #autel #auteltools #autelnorthamerica

Autel Academy is an ASE-accredited ADAS training provider and is recognized by the I-CAR Industry Training Alliance, meeting the rigorous technician training and development standards set by both organizations. Earn I-CAR credits and complete Autel Academy ADAS Level 1 Certification with the 3-day program. Register Now: https://autel.us/autel-academy/ Don’t forget to like the video and hit the subscribe button to never miss a new video! Visit our website and view our product line at: https://autel.us/ FOLLOW US ON: Facebook: https://www.facebook.com/auteltools Instagram: https://www.instagram.com/auteltools/ X (formally Twitter): https://twitter.com/AutelTools TikTok: https://www.tiktok.com/@auteltools #autel #auteltools #autelnorthamerica #ADAS #AutelAcademy

In this ADAS Calibration Lab video, Stew from Autel walks you through a complete ADAS calibration on a 2025 Volkswagen Atlas using the IA1000 calibration system. This step-by-step guide covers forward-facing camera calibration, adaptive cruise control (ACC) radar calibration, and rear camera calibration, along with essential setup tips and best practices. Whether you're an ADAS technician, auto repair shop, or windshield installer, this video shows you exactly how to perform accurate calibrations and avoid common mistakes. 🔧 What You’ll Learn in This Video - How to set up the IA1000 calibration system properly - Forward-facing camera calibration (NO token required on this vehicle) - ACC radar calibration using precision mirror reflector - Rear camera calibration setup and execution - Static vs dynamic calibration explained - Pre-scan and post-scan workflow for documentation - How to generate calibration reports with images - Proper voltage requirements and setup tips ⚠️ Pro Tips for Successful Calibration - Keep battery voltage above 12V for stability - Ensure precise measurements (distance, height, alignment) - Use OEM-compliant targets for accuracy - Follow ignition cycle prompts carefully - Always perform post-calibration verification (test drive when required) 🚗 Why This Matters Modern vehicles like the 2025 Volkswagen Atlas rely heavily on ADAS systems for safety features like lane assist, adaptive cruise control, and blind spot monitoring. Proper calibration ensures: - Accurate sensor performance - Safer driving conditions - Compliance with OEM standards - R- educed liability for repair shops 🛠️ Tools & Equipment Used - IA1000 ADAS Calibration System OEM Spec Calibration Targets - Mirror Reflector for Radar Calibration - Laser Alignment & Leveling Tools 📈 Who This Video Is For - ADAS Calibration Technicians - Auto Glass Installers - Collision Repair Shops - Automotive Diagnostic Professionals 🔔 Subscribe for More ADAS Training We’re releasing more videos on: -Around View Camera Calibration - Digital Target Boards - Advanced Laser Calibration Techniques 👉 Visit our website for support, tools, and training: https://autel.us/ FOLLOW US ON: Facebook: https://www.facebook.com/auteltools Instagram: https://www.instagram.com/auteltools/ X (formally Twitter): https://twitter.com/AutelTools TikTok: https://www.tiktok.com/@auteltools #autel #auteltools #autelnorthamerica

Joe unboxes and sets up the IWA500 Wheel Alignment System. The Autel MaxiAlign IWA500 is a purpose-built wheel alignment system engineered to do one thing extremely well: deliver fast, precise, and repeatable alignments. With broad vehicle coverage supporting U.S., Asian, and European models from 1975 to current production, its advanced guided workflow begins with server-based vehicle identification, followed by a comprehensive all-systems pre-scan, undercarriage inspection, and tire tread depth and pressure analysis to ensure optimal alignment conditions. More info: https://autel.us/product/iwa500t/ Don’t forget to like the video and hit the subscribe button to never miss a new video! Visit our website and view our product line at: https://autel.us/ FOLLOW US ON: Facebook - https://www.facebook.com/auteltools Instagram - https://www.instagram.com/auteltools/ X (formally Twitter) - https://twitter.com/AutelTools TikTok - https://www.tiktok.com/@auteltools #autel #auteltools #autelnorthamerica

Rogers and Marcos give a demonstration and calibration walkthrough of the Autel IA1000 automated Wheel Alignment & ADAS system at NADA 2026. The IA1000 is a next-generation ADAS calibration and wheel alignment system powered by the advanced diagnostics of the MaxiSYS Ultra S2. Its robotic one-step forward-facing target positioning significantly reduces manual setup time, streamlining the process for maximum efficiency. High-definition optical cameras combined with laser-guided Blind Spot, ACC, and AVM pattern positioning enhance accuracy while minimizing human error. Automated unlevel floor compensation further ensures speed and accuracy. More info here: https://autel.us/product/maxisys-ia1000/ Don’t forget to like the video and hit the subscribe button to never miss a new video! Visit our website and view our product line at: https://autel.com/us/ FOLLOW US ON: Facebook - https://www.facebook.com/auteltools Instagram - https://www.instagram.com/auteltools/ X (formally Twitter) - https://twitter.com/AutelTools TikTok - https://www.tiktok.com/@auteltools #autel #auteltools #autelnorthamerica

Autel ADAS brought next-level innovation to the floor and the energy was electric. From powerful demos to industry conversations that shape the future of automotive safety technology, Autel was thrilled to showcase how we're redefining what’s possible in advanced driver assistance systems. For more IA1000 info, visit: https://autel.us/product/maxisys-ia1000/ Don’t forget to like the video and hit the subscribe button to never miss a new video! Visit our website and view our product line at: https://autel.com/us/ FOLLOW US ON: Facebook - https://www.facebook.com/auteltools Instagram - https://www.instagram.com/auteltools/ X (formally Twitter) - https://twitter.com/AutelTools TikTok - https://www.tiktok.com/@auteltools #autel #auteltools #autelnorthamerica

Autel ADAS brought next-level innovation to the floor and the energy was electric. From powerful demos to industry conversations that shape the future of automotive safety technology, Autel was thrilled to showcase how we're redefining what’s possible in advanced driver assistance systems. For more IA1000 info, visit: https://autel.us/product/maxisys-ia1000/ Don’t forget to like the video and hit the subscribe button to never miss a new video! Visit our website and view our product line at: https://autel.com/us/ FOLLOW US ON: Facebook - https://www.facebook.com/auteltools Instagram - https://www.instagram.com/auteltools/ X (formally Twitter) - https://twitter.com/AutelTools TikTok - https://www.tiktok.com/@auteltools #autel #auteltools #autelnorthamerica

In this ADAS Calibration Lab episode, we demonstrate the process of performing a forward camera calibration on a 2025 Toyota RAV4 using a hybrid workflow that combines the Autel IA1000 ADAS Calibration System, Autel Guided ADAS, with Toyota’s factory calibration tool. This guide is designed for ADAS technicians, collision repair professionals, and automotive diagnostics specialists looking to improve calibration accuracy and efficiency. Modern Toyota platforms rely heavily on precise setup, proper voltage, and OEM measurement procedures to ensure successful calibration outcomes. 🔧 What You’ll Learn in This Video - How to properly set up the Autel IA1000 calibration system - Step-by-step ADAS calibration procedures on the 2025 Toyota RAV4 - Forward-facing camera calibration using Toyota Safety Sense - Proper target placement and measurement techniques - How to perform pre-scan and post-scan diagnostics - Static vs dynamic calibration explained - Common causes of calibration failure and how to avoid them - How to generate calibration reports for documentation ⚠️ Pro Tips for Successful Calibration - Maintain battery voltage above 12V for stability - Ensure precise measurements and alignment before starting - Always verify calibration targets meet OEM specifications - Follow all scan tool prompts carefully during the process - Perform a test drive when dynamic calibration is required 🚗 Why ADAS Calibration Matters Modern vehicles like the 2025 Toyota RAV4 rely on ADAS systems such as Toyota Safety Sense, adaptive cruise control, and lane keep assist. Proper calibration ensures these systems function correctly and safely after repairs and component replacements. 🛠️ Tools & Equipment Used - Autel IA1000 ADAS Calibration System - OEM Spec Calibration Targets - Laser Alignment and Measurement Tools 📈 Who This Video Is For - ADAS Technicians - Collision Repair Shops - Auto Glass Installers - Automotive Diagnostic Professionals 🔔 Subscribe for More ADAS Training We’re releasing more videos covering advanced calibration techniques, new vehicle platforms, and diagnostic strategies. 👉 Visit our website for support, tools, and training: https://autel.us/ FOLLOW US ON: Facebook: https://www.facebook.com/auteltools Instagram: https://www.instagram.com/auteltools/ X (formally Twitter): https://twitter.com/AutelTools TikTok: https://www.tiktok.com/@auteltools #ADAS #ToyotaRAV4 #Calibration #Autel #IA1000

At Mezzio Auto Care in Naugatuck, Connecticut, the team combines decades of experience with the latest diagnostic and calibration technology to keep every vehicle performing its best. In this episode of Autel In-Shop, ASE Master Technician Eric Garbe visits the long-running Naugatuck shop to see what’s kept it thriving since 1933. Owner Linc Lewis and technician Mario Cipriano share how Autel tools have become essential to their work in diagnostics, ADAS calibration, and alignment. “We were fortunate enough to meet with some reps from Autel, and in the preliminary discussions saw that these tools were pretty comprehensive,” Lewis says. “Then, during [one of the big tool and equipment shows], we were able to actually see it in action, and we knew at that point that that was the way we wanted to go.” “I believe that the technicians feel more empowered because of the support and the training,” he adds. “When I have a technician working on an ADAS … the support [Autel] can give us has eliminated any need for us to tell a customer no.” Cipriano, who’s been with Mezzio for 30 years, agrees: “The Autel equipment is really great. The updates are almost daily. That’s probably one of the best things about it. It’s very rare that we can’t do what we have to do on a car. They have a great tech line that I use often, and they’re always there.” For Mezzio Auto Care, that combination of dependable equipment, like the MaxiSYS Ultra S2 and IA900, and responsive support has made Autel a true partner in their day-to-day work.Don’t forget to like the video and hit the subscribe button to never miss a new video! More IA900 Info: https://autel.us/product/maxisys-ia900wa/ Visit our website and view our product line at: https://autel.com/us/ FOLLOW US ON: Facebook - https://www.facebook.com/auteltools Instagram - https://www.instagram.com/auteltools/ X (formally Twitter) - https://twitter.com/AutelTools TikTok - https://www.tiktok.com/@auteltools #autel #auteltools #autelnorthamerica

High-volume shops like Lindsay Honda in Columbus, Ohio, hang their hats on doing the best work for their customers in the most efficient way possible. That efficiency comes from experience, teamwork, and investing in the right tools. With 47 bays, two shifts, and more than 70 technicians, this dealership relies on Autel technology to keep its workflow sharp and consistent. In this episode of Autel In-Shop, host Eric Garbe meets Lindsay Honda Service Manager Matt George, who shares how the Autel IA900 ADAS alignment and ADAS calibration system helps technicians handle both Honda and non-Honda vehicles with speed and precision. “Everything is so self-explanatory,” George says. “Compared to similar models, it’s about a third of the cost and does everything you’d ever want it to do.” The shop’s foreman, Mike Kraft, adds that Autel scan tools make diagnostics faster and easier for every tech in the shop. “They’re quick, wireless, and user-friendly,” Kraft says. “I’ve tried them all, and I always come back to Autel.” With Autel technology like the IA900, MS906, and TPMS tools, Lindsay Honda shows what’s possible when advanced equipment supports a skilled team. More IA900 details here: https://autel.us/product/maxisys-ia900wa/ Visit our website and view our product line at: https://autel.com/us/ FOLLOW US ON: Facebook - https://www.facebook.com/auteltools Instagram - https://www.instagram.com/auteltools/ X (formally Twitter) - https://twitter.com/AutelTools TikTok - https://www.tiktok.com/@auteltools #autel #auteltools #autelnorthamerica

The days of separate machines, processes, and investments for wheel alignment and ADAS are over. Wheel alignment has been a staple service in repair shops for decades—but in recent years, the rise of Advanced Driver Assistance Systems (ADAS) has changed the game. Many OEM procedures now require ADAS calibration after an alignment or suspension repair, turning a traditional service into a multi-step process essential for modern vehicles and safety compliance. In 2022, Autel transformed the industry by introducing the IA900—the first system to combine precision optical wheel alignment and ADAS calibration in a single platform. Until then, shops needed two separate machines, workflows, and capital investments. The IA900 proved there was a better way. The Autel IA900 and now the IA1000 remain unmatched in their combination of ease-of-use, broad vehicle coverage, and a streamlined workflows. Don’t forget to like the video and hit the subscribe button to never miss a new video! Visit our website and view our product line at: https://autel.com/us/ FOLLOW US ON: Facebook - https://www.facebook.com/auteltools Instagram - https://www.instagram.com/auteltools/ X (formally Twitter) - https://twitter.com/AutelTools TikTok - https://www.tiktok.com/@auteltools #autel #auteltools #autelnorthamerica

In shops across the country, the right tools make all the difference between simply getting the job done and building long-term success. In Burton, Michigan, Martin’s Tire and Service has found that difference in Autel technology. In this episode of Autel In-Shop, host Eric Garbe visits owner Martin Woods to see how Autel equipment powers a 10-bay operation that offers everything from full-service auto repair to wheel alignments and ADAS calibrations. That transformation starts with the IA900 ADAS alignment and ADAS calibration system. “We currently use the Autel IA900 as our frame and absolutely love it. It’s easy to use and quick to set up, so it’s great ROI,” Woods says. Technicians also rely on Autel scan tools for diagnostics. From seamless TPMS programming to quick key replacements, Autel tools keep Martin’s Tire and Service ready for every customer need. And, with reliable support, Woods says issues never slow them down. “I make a phone call and within 10 minutes I’m back on the road,” he says. “If you want to make more money faster, buy Autel. If you want your technicians to see that you’re trying to make their life easier, buy Autel.” Don’t forget to like the video and hit the subscribe button to never miss a new video! Learn more about the Autel IA900 Wheel Alignment & ADAS System: https://autel.us/product/maxisys-ia900wa/ Visit our website and view our product line at: https://autel.com/us/ FOLLOW US ON: Facebook - https://www.facebook.com/auteltools Instagram - https://www.instagram.com/auteltools/ X (formally Twitter) - https://twitter.com/AutelTools TikTok - https://www.tiktok.com/@auteltools #autel #auteltools #autelnorthamerica

In shops across the country, the right tools make all the difference between simply getting the job done and building long-term success. In Burton, Michigan, Martin’s Tire and Service has found that difference in Autel technology. In this episode of Autel In-Shop, host Eric Garbe visits owner Martin Woods to see how Autel equipment powers a 10-bay operation that offers everything from full-service auto repair to wheel alignments and ADAS calibrations. That transformation starts with the IA900 ADAS alignment and ADAS calibration system. “We currently use the Autel IA900 as our frame and absolutely love it. It’s easy to use and quick to set up, so it’s great ROI,” Woods says. Technicians also rely on Autel scan tools for diagnostics. From seamless TPMS programming to quick key replacements, Autel tools keep Martin’s Tire and Service ready for every customer need. And, with reliable support, Woods says issues never slow them down. “I make a phone call and within 10 minutes I’m back on the road,” he says. “If you want to make more money faster, buy Autel. If you want your technicians to see that you’re trying to make their life easier, buy Autel.” Don’t forget to like the video and hit the subscribe button to never miss a new video! Visit our website and view our product line at: https://autel.com/us/ FOLLOW US ON: Facebook - https://www.facebook.com/auteltools Instagram - https://www.instagram.com/auteltools/ X (formally Twitter) - https://twitter.com/AutelTools TikTok - https://www.tiktok.com/@auteltools #autel #auteltools #autelnorthamerica

In this Motor Age Tech Tip, Keith Perkins demonstrates a complete vehicle repair process using the Autel IA900 and the Ultra S2. The featured repair is performed on a Mercedes-Benz, covering everything from digital vehicle inspection to wheel alignment and ADAS calibration. Perkins walks viewers through each step, explaining how Autel’s integrated platform streamlines the workflow and enhances efficiency. Using the Autel Ultra S2, technicians can perform a complete repair process using Autel tools, including battery testing, tire pressure monitoring, and suspension inspections — all documented digitally and uploaded to a shop management system. Perkins highlights the importance of accurate Mercedes-Benz wheel alignment following suspension work and shows how the IA900’s streamlined suspension repair and calibration capabilities reduce time and complexity. The process also includes an in-depth look at ADAS calibration with Autel IA900, utilizing the Ultra S2’s intuitive interface and optical positioning system to ensure precise sensor alignment without traditional tools like plumb bobs or string lines. Watch the full video to see how Autel’s tools transform your service bay. There's lots more from Motor Age! Check out our video library at www.youtube.com/MotorAgeMagazine?sub_confirmation=1 Receive your FREE SUBSCRIPTION to Motor Age here: https://endeavor.dragonforms.com/loading.do?omedasite=MAnew Each issue is packed with in-depth technical articles from experts, brief tech tips and repair strategies, TSBs, and much, much more! DID YOU KNOW? Motor Age offers a library of ASE Certification training materials. Motor Age Training's books, practice tests and video resources is edited by ASE Master Technicians with years of experience in repair processes. Each product is designed to help you prepare for and pass your ASE certification exam – GUARANTEED. CLICK HERE TO FIND OUT MORE: https://motoragetraining.com/ FOLLOW US ON FACEBOOK: https://www.facebook.com/MotorAgeMagazine/ VISIT OUR WEBSITE FOR EVERYTHING AUTOMOTIVE http://www.vehicleservicepros.com @@@@@@@@@@@@@@@@@ Due to factors beyond the control of Endeavor Business Media, it cannot guarantee against unauthorized modifications of this information or improper use of this information. Endeavor Business Media assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Endeavor Business Media recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of Endeavor Business Media, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not Endeavor Business Media. The tool and/or equipment featured in this video was supplied by the manufacturer and may or may not be retained by the reviewer at no cost.

The Autel IA1000 is a next-generation automated ADAS calibration, wheel alignment, and advanced diagnostics system, engineered for maximum efficiency, precision, and seamless operation. Designed to streamline workflows, it features robotic one-step forward-facing target positioning, laser-guided accuracy, and automated floor compensation, eliminating setup errors and optimizing calibration performance. The IA1000 is the ultimate all-in-one ADAS calibration, wheel alignment, and diagnostics solution, delivering unmatched accuracy, efficiency, and scalability for modern automotive service centers. Full product details: https://autel.us/product/maxisys-ia1000/ Don’t forget to like the video and hit the subscribe button to never miss a new video! Visit our website and view our product line at: https://autel.com/us/ FOLLOW US ON: Facebook - https://www.facebook.com/auteltools Instagram - https://www.instagram.com/auteltools/ X (formally Twitter) - https://twitter.com/AutelTools TikTok - https://www.tiktok.com/@auteltools #autel #auteltools #autelnorthamerica

How Midas of Richmond Uses Autel Equipment to Boost the Bottom Line Midas of Richmond, a six-location shop with nearly three decades of built community trust, is proof that owning the right tools can make all the difference. In its newest location in Churchill, Virginia, co-owner Mark Smith has integrated the latest cutting-edge equipment from Autel – including the IA900 ADAS calibration frame, an ADAS Bay Max lift, and the MaxiSYS Ultra scan tool. By focusing on ADAS calibrations, alignments, and diagnostics, Midas of Richmond has expanded its service offerings and increased revenue through the added capabilities that come with Autel systems. Mark shares how ADAS calibration has become a key revenue driver for his business, with the ability to easily perform steering angle adjustments, sensor calibrations, and more, all with a single system and workflow. “Historically, alignments have been a one-source revenue code. Did you do an alignment or did you not?” Mark said. “With Autel and with ADAS, now you've got the calibrations, you've got steering angle of inclination – you've got all of those services that fit right into a much broader alignment ticket. The alignment can go from a $120-$140 line item on a repair order to potentially $400-$800.” The success of Midas of Richmond shows that investing in top-tier equipment and training isn’t just about keeping up with technology. It’s about staying ahead of the competition and offering customers the highest level of service. Don’t forget to like the video and hit the subscribe button to never miss a new video! Visit our website and view our product line at: https://autel.com/us/ FOLLOW US ON: Facebook - https://www.facebook.com/auteltools Instagram - https://www.instagram.com/auteltools/ X (formally Twitter) - https://twitter.com/AutelTools TikTok - https://www.tiktok.com/@auteltools #autel #auteltools #autelnorthamerica